Ceva extends its Connect IP Portfolio with Wi-Fi 7 platform for high-end consumer and industrial IoT

Ceva has announced the general release of its next generation RivieraWaves Wi-Fi 7 IP platform, further expanding its widely-licensed portfolio of connectivity IP, targeting high-end consumer and industrial applications including gateways, TVs, set-top-boxes, streaming media devices, AR/VR headsets, personal computing and smartphones. The RivieraWaves Wi-Fi 7 IP leverages all the latest advanced features of the IEEE 802.11be standard to deliver a premium high performance, cost- and power-optimised Wi-Fi solution for integration into the next wave of Wi-Fi Access Point (AP) and Station (STA) products.

According to global technology intelligence firm ABI Research, annual Wi-Fi enabled chipset shipments will exceed 5.1 billion by 2028, with more than 1.7 billion of these chipsets supporting the Wi-Fi 7 standard. As Wi-Fi enabled device shipments continue to grow, increasing numbers of semiconductor companies and OEMs are choosing to integrate Wi-Fi connectivity into their chip designs, and need access to high quality Wi-Fi IP to reduce the development costs and risks. Spanning Wi-Fi 4/5/6 over the past decade, Ceva has already established a considerable leadership position in Wi-Fi IP licensing, with more than 40 licensees for its RivieraWaves Wi-Fi 6 IP family, serving a wide range of end markets and applications, from end points to access points, across the IoT sphere. Expanding on this leadership position, Ceva’s RivieraWaves Wi-Fi 7 IP provides a unique, comprehensive 802.11be MAC and PHY solution for integration into the next generation of Wi-Fi SoC products.

Andrew Zignani, Senior Research Director, ABI Research, commented: “Ceva’s wireless connectivity IPs play an integral role in the proliferation of connectivity standards in the broad IoT markets, as is evident from their customer’s success in shipping more than 1 billion connectivity chips annually. With the introduction of their RivieraWaves Wi-Fi 7 IP platforms, semiconductor companies and OEMs have a trusted partner to develop differentiated, high-performance Wi-Fi 7 chipsets for their connectivity roadmaps, with lower risk and a lower cost of ownership.”

Tal Shalev, Vice President and General Manager of the Wireless IoT BU at Ceva, stated: “The relentless expansion of Wi-Fi usage has pushed the Wi-Fi 7 standard to offer enhanced data throughput, improved latency and support more spectrum in the face of mounting network congestion. Achieving this requires highly complex, cutting-edge functionalities like 4K QAM modulation, Multi Link Operation and Multi Resource Unit to optimize link efficiency across the available bands. Our RivieraWaves Wi-Fi 7 IP platform incorporates all the features of this latest-generation, wireless standard, dramatically simplifying development and time-to-market for companies looking to add Wi-Fi 7 connectivity to their products.”

Wi-Fi 7’s 4K QAM modulation scheme is a substantial increase on the previous 1K QAM of Wi-Fi 6, while Multi Link Operation (MLO) introduces dynamic channel aggregation, seamlessly combining heterogenous channels from the same or different bands to navigate interference and boost throughput. Similarly, Multi Resource Units (MRU) enables the creation of larger channel bandwidths by intelligently stitching together punctured or disjointed Resource Units within the same band. The outcome is not only a remarkable up to 5 times increase in raw speeds but also significantly reduced latency, thanks to diminished contentions and retries.

visit https://www.ceva-ip.com/product/rivierawaves-wi-fi-platforms/.

 

> Read More

Mouser signs global distribution agreement with Ambiq to deliver ultra-low power AI microcontrollers

Mouser has announced a new global distribution agreement with Ambiq, a leading supplier of low-powered, AI-enabled microcontrollers for wearables, hearables, IoT, edge devices and mobile edge computing applications.

“We are pleased to announce our partnership with Ambiq, which furthers our commitment to providing the latest products and technologies to our customers worldwide,” said Kristin Schuetter, Vice President of Supplier Management at Mouser Electronics. “We look forward to providing engineers and buyers worldwide with their innovative embedded solutions, backed by Mouser’s best-in-class logistics and unsurpassed customer service.”

“Mouser is well-known for its worldwide distribution and support system,” said Mike Kenyon, Vice President of Sales and Business Development at Ambiq. “We are excited to enter into this relationship. With distribution through Mouser, we can draw on their expertise in delivering leading-edge technologies and expand our global customer base.”

Among the Ambiq products now available from Mouser are the Ambiq Apollo4 Blue Lite system-on-chip (SoC) and the Ambiq Apollo4 Blue Lite evaluation board. The Apollo4 Blue Lite SoC features a 32-bit Arm® Cortex®-M4 core with a Floating-Point Unit, along with a Bluetooth® Low Energy 5.1 radio with robust RF connectivity. This SoC is ideal for use in battery-powered endpoint devices, including smartwatches, fitness bands, animal trackers, voice-activated remotes and digital health products. The Ambiq Apollo4 Blue Lite evaluation board offers a complete demonstration and development platform for the Apollo4 Blue Lite device.

Mouser also offers the Apollo3 Blue Plus evaluation board and the Apollo3 Blue Plus SoC. The Apollo3 Blue Plus device is based on Ambiq’s Voice-on-SPOT (VoS) platform, making it the perfect microprocessor for enabling always-on voice assistant integration and command. The Apollo3 Blue Plus evaluation board enables quick and easy prototyping of the SoC. The Apollo3 Blue Plus Voice-on-SPOT kit, also available from Mouser, facilitates demos, evaluation, and the development of ultra-low power audio and voice capabilities on the Apollo3 Blue Plus SoC. The kit provides always-on voice capability with options for one or two microphones, signal processing, wake word/command detection, codec, and Bluetooth Low Energy communication.

The Artasie AM1805 evaluation board offers an easy method to measure and evaluate Ambiq’s AM18x5 real-time clocks. The evaluation board includes on-chip oscillators to provide minimum power consumption, full RTC functions including battery backup and programmable counters and alarms for timer and watchdog functions, and a PC serial interface for communication with a host controller.

To learn more about Ambiq products available from Mouser, visit https://www.mouser.com/manufacturer/ambiq/.

> Read More

Nordic-powered module provides Bluetooth LE audio connectivity

Wireless communications company Rayson Technology has released a multiprotocol module based on Nordic Semiconductor’s nRF5340 System-on-Chip (SoC). The SoC is designed for advanced Bluetooth LE audio applications, as well as sophisticated metering, wearable, smart home, industrial, and medical use cases. Measuring just 16.5 by 13.0 by 2.5 mm, the ‘BTM-N340X’ module supports LE Audio and its Low Complexity Communication Codec (LC3), which together enable higher quality, lower power wireless audio streaming compared with existing Classic Bluetooth audio solutions.

The module employs the nRF5340 SoC’s dual Arm Cortex-M33 processors – providing a high performance application processor capable of DSP and Floating Point (FP) alongside a fully programmable, ultra low power network processor. The application core manages the LC3 codec, while the Bluetooth LE protocol is supervised by the network processor.

“The BTM-N340X module has been designed for a wide range of applications, aiming in particular to provide enhanced audio experiences via Bluetooth LE Audio,” says Bob Wu, CTO at Rayson Technology. “It enables one device to stream audio to multiple pairs of wireless headphones, and can facilitate audio broadcasts through public address systems, such as in airports and museums. This module is also compatible with smart speakers and home audio systems.”

The module’s ultra-low power consumption is made possible due to the nRF5340’s power-optimised multiprotocol radio, which offers a TX current of 3.4 mA (0 dBm TX power, 3 V, DC/DC) and RX current of 2.7 mA (3 V, DC/DC). The sleep current is as low as 0.9 µA. Additionally, because the cores can operate independently, developers have the flexibility to optimise performance for power consumption, throughput, and low latency response.

Two flexible antenna options are available for the module—a pre-certified U.F.L Connector and a PCB pin out—depending on the product application. The module is designed to operate within a temperature range of -40 to +85°C.

“The dual processors made the nRF5340 SoC an excellent choice for this module’s LE Audio applications,” says Wu. “The large memory capacity, radio sensitivity, and low power consumption were also major drawcards. In addition to the excellent technical capabilities of the chip, the high level of support from Nordic was a key factor when making our selection.”

https://www.nordicsemi.com

> Read More

Novocomms launches ‘game-changing’ L Band antenna.

Novocomms has unveiled NovoSat, a new lightweight dual port product with high performance GNSS capability and offering the full L Band frequency band for other devices.

Developed specifically for use within high density environments, urban canyons and extremely rugged terrains, the new antenna also performs well in poor weather conditions, thanks to its high gain, giving unrivalled performance quality and positional accuracy whilst supporting dual port operation. Designed at Novocomms’ global headquarters in Birmingham, the NovoSat antenna is mechanically rugged, jam resistant and custom manufactured in the UK to maintain product integrity and security.

Ideal for use in satellite phones or global satellite positioning systems, Novocomm’s new antenna weighs just 5g, much lighter than comparable products on the market, due to the innovative use of plastics within the manufacturing process. Traditionally, ceramics have been used in the manufacture of L Band antennas, making them heavier and more expensive than Novocomm’s latest model.

Commenting on the performance of the prototype, Sampson Hu, CEO and founder of Novocomms, said: “Our new NovoSat product really does represent the next generation of L Band antenna, out-performing the competition when it comes to frequency, gain, form factor, efficiency and even price. We’re very excited about the doors that this new product can open for electronic manufacturers working the fields of automotive, mobile devices, AUVs, wearables and also those innovating in the IoT. space.”

The company’s cutting-edge antenna technology is used in a wide range of wireless devices, including laptops, tablets and smartwatches. By offering smaller, more efficient antennas with better performance and lower power consumption, Novocomms is revolutionising the wireless communication industry.

> Read More

About Smart Cities

This news story is brought to you by smartcitieselectronics.com, the specialist site dedicated to delivering information about what’s new in the Smart City Electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Smart Cities Registration