ICs & Semiconductors

Gecko series 2 scales IoT connectivity

Wed, Apr 24, 2019

SoCs and software in Wireless Gecko series 2, from Silicon Labs, are designed to optimise smart home and industrial IoT (IIoT) applications.  Initial offerings are small form factor SoCs with a dedicated security core and an on-chip radio. According to Silicon Labs, the radio delivers x2.5 the wireless range of competing solutions.

The Wireless Gecko series 2 simplifies IoT product design with integrated SoC options and reusable software that make RF communication more dependable and energy efficient, claims Silicon Labs.

The first products include EFR32MG21 SoCs supporting multi-protocol, Zigbee, Thread and Bluetooth mesh networking, and EFR32BG21 SoCs dedicated to Bluetooth Low Energy and Bluetooth mesh. These SoCs provide line-powered IoT products including gateways, hubs, lights, voice assistants and smart electric meters.

According to the company, the SoCs provide best-in-class RF performance with +20dBm output power and up to +124.5dB link budget. Improved blocking performance enables a robust radio and processing and security are assured with the 80MHz Arm Cortex-M33 core, which has TrustZone technology.

The 40nm process technology yields a low active current SoC (50.9 microA/MHz). The multi-protocol SoCs are in a 4.0 x 4.0mm QFN package.

The company has released some details of future pin- and software-compatible Wireless Gecko Series 2 SoCs and modules, which will have additional dedicated security technologies for connected products with enhanced security features, which is expected to drive mass adoption of the IoT.

Silicon Labs’ Simplicity Studio suite of tools for development support includes a unified wireless development kit, software development kits, energy profiler, patented network analysis, application demos and mobile apps. The Wireless Gecko starter kit mainboard and EFR32xG21 radio boards are also available now.

The EFR32MG21 and EFR32BG21 are available now in sample and production quantities.

http://www.silabs.com

> Read More

Renesas launches controller and GaN FET driver for satellites

Tue, Apr 23, 2019

For DC/DC power supplies in small satellites (smallsats) and launch vehicles, Renesas Electronics offers the ISL71043M and ISL71040M, believed to be the first plastic packaged, radiation-tolerant PWM controller and GaN FET driver for small satellite mega constellations in low earth orbit (LEO).

The ISL71043M single-ended current mode PWM controller and the ISL71040M is a low-side GaN FET driver for isolated flyback and half-bridge power stages, and motor control driver circuits in satellite buses and payloads. They meet the need of private ‘new space’ companies launching smallsats to form large constellations operating in multiple LEO planes. Smallsat mega-constellations provide global broadband internet links, as well as high-resolution earth observation imaging for sea, air, and land asset tracking.

The ISL71043M PWM controller provides fast signal propagation and output switching in a small 4.0 x 5.0mm SOIC plastic package, reducing PCB area up to three times compared to competing ceramic packages. The ISL71043’s 5.5mA max supply current reduces power loss by more than a factor of three. The adjustable operating frequency (up to 1 MHz) enables higher efficiency and the use of smaller passive filter components.

The ISL71043M and ISL71040M are characterisation-tested at a total ionising doze (TID) of up to 30krads(Si), and for single event effects (SEE) at a linear energy transfer (LET) of 43MeV•cm2/mg. Both devices operate over an extended temperature range of -55 to +125 degrees C.

The ISL71040M low-side GaN FET driver safely drives Renesas’ rad-hard GaN FETs in isolated topologies and boost type configurations. It operates with a supply voltage between 4.5 and 13.2V, a gate drive voltage (VDRV) of 4.5V, and it includes both inverting and non-inverting inputs. The device’s split outputs adjust the turn-on and turn-off speeds, and its high current source and sink capability enables high frequency operation. The ISL71040M ensures reliable operation when driving GaN FETs by precisely controlling the gate driver voltage to +three to five per cent over temperature and radiation. It also includes floating protection circuitry to eliminate unintentional switching.

The ISL71043M PWM controller and ISL71040M GaN FET driver can be combined with the ISL73024SEH 200V GaN FET or ISL73023SEH 100V GaN FET, and ISL71610M passive-input digital isolator to create a variety of power stage configurations.

http://www.renesas.com

> Read More

LED driver sheds light on animation effects

Wed, Apr 10, 2019

Smooth animation effects in wearable electronics and appliances – where the light fades in and fades or dims in increments (known as colour chasing or deep breathing) – can be achieved using STMicroelectronics LED1202 12-channel LED driver. The programmable 12-channel RGB-LED driver is designed to enhance lighting effects and animation for smart devices around the home and wearable electronics.

The LED1202 can store eight programmable patterns and sequences and operate independently of the main controller. This enables the host system to save power while sophisticated lighting effects run continuously.  The driver’s 12-bit internal PWM dimming enables precision control of programmed sequences. The main controller can set 8-bit values for analogue dimming via the driver’s I2C interface. According to STMicroelectronics, minimal external components are required to complete the driver circuit.

The single LED1202’s 12 output channels enable it to drive four RGB LEDs at up to 20mA per channel. A synchronisation feature allows up to eight LED1202 drivers to be connected to control larger LED arrays. There is also low-current channel matching, within two per cent (typical) at 2.5mA, to enhance colour consistency. Phase shifting between channels minimises current ripple and prevents excessive peak demand, adds STMicroelectronics. There are also built-in safety features, such as open-LED detection, over-temperature protection, and a fault-flag pin.

The LED1202JR is available now in a 1.71 x 2.16mm WLCSP-20 flip-chip. The LED1202QTR is available in a 3.0 x 3.0mm VFQFPN-20.

There is also the STEVAL-LLL007V1 evaluation kit to support development of new products and lighting sequences.

http://www.st.com

> Read More

PoE chipset exploits IEEE 802.3bt specificiation

Thu, Apr 04, 2019

Reliable and space-efficient powered devices (PDs) can be built to take advantage of the latest IEEE 802.3bt Power-over-Ethernet (PoE) specification, says STMicroelectonics, on the introduction of the PM8804 and PM8805.

The PM8804 and PM8805 provide the PoE-converter circuitry for PDs up to class-eight, which defines a usable power budget of 71W. According to STMicroelectronics, the chipset saves space, enhances reliability, and cuts time to market for 5G small cells, WLAN access points, switches, and routers. The PoE chipset also targets smart-building and smart office applications such as IP cameras, access-control systems, display panels, lighting, curtain or shutter controllers, video-call systems, IP phones, and tabletop consoles.

The PM8804 implements a PWM controller for a 48V isolated flyback or forward converter, including dual low-side gate drivers for high-efficiency forward active-clamp topologies. The operating frequency is selectable up to 1MHz, allowing the use of small external filter and decoupling components for high power density. The PM8804 is a high-voltage start-up regulator with 20mA output capability to help save on board space and bill of materials.

The PM8805 companion chip contains two active bridges, a charge pump for driving high-side MOSFETs, a hot-swap FET, and the IEEE 802.3bt compliant interface. Integrating the active bridges saves the real estate otherwise occupied by eight discrete MOSFETs and their driving circuitry, explains STMicroelectronics. The PM8805 generates a power-good signal for enabling the PM8804 and other circuitry such as an LED driver, and supports maintain power signature (MPS) current control that allows the PD to enter power-saving standby without being disconnected.

Both devices are in production now. The PM8804 is packaged as a 3.0 x 3.0mm, 0.5mm-pitch VFQFPN-16. The PM8805 in 8.0 x 8.0mm thermally enhanced VFQFPN-43 featuring exposed pads.

This news story is brought to you by softei.com, the specialist site dedicated to delivering information about what’s new in the electronics industry, with daily news updates, new products and industry news.

To stay up-to-date, register to receive our weekly newsletters and keep informed of the latest technology news and new products from around the globe. Simply click this link to register here:  softei.com

http://www.st.com

> Read More

About Smart Cities

This news story is brought to you by smartcitieselectronics.com, the specialist site dedicated to delivering information about what’s new in the Smart City Electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Smart Cities Registration