Resonant controller IC is designed for power supply and lighting drivers

The second generation ICL5102 resonant controller IC has been designed by Infineon specifically for power supply and lighting drivers.

Main target applications are LED drivers for professional and industrial lighting, and street lighting. The controller IC can also be used for offline AC/DC power supplies and LCD TVs, adds Infineon.

The ICL5102 integrates power factor correction (PFC) and half-bridge (HB) controllers in a single DSO-16 package. It supports universal input voltages ranging from 70 to 325V AC.

Only a few external components are required to configure and support the controller IC, says Infineon, adding that all parameters are set by resistors. The ICL5012 supports fast start-up under 500 milliseconds at less than 100 microA. According to Infineon, the industry-leading PFC is greater than 99 per cent and total harmonic distortion (THD) is less than 3.5 per cent. The controller has up to 94 per cent efficiency by resonant topology, while the active burst mode for low standby consumes less than 30 mW. An enable/disable function supports dimming.

The PFC controller features brown-out detection, adjustable THD for light load operation, and high power factor correction. Due to the high accuracy of bus voltage sensing, only four pins are required for PFC. The resonant HB controller has an integrated 650V high-side driver using an internal coreless transformer with self-adaptive dead time ranging between 250 and 750 nanoseconds, and an operating frequency up to 500kHz. It can detect overload, short circuit, bus, HB or output under- and over-voltage as well as over-temperature. An integrated capacitive mode regulator prevents operation in capacitive mode. All protection features use auto restart (no latch).

Engineering samples and a reference design, REF-ICL5102-U130W-CC, are available now. Full production and shipment will start in Q2 2018.

This news story is brought to you by softei.com, the specialist site dedicated to delivering information about what’s new in the electronics industry, with daily news updates, new products and industry news.

To stay up-to-date, register to receive our weekly newsletters and keep informed of the latest technology news and new products from around the globe. Simply click this link to register here:  softei.com

http://www.infineon.com/icl5102

> Read More

Linear LED controllers do not require inductors for signage and smart-lighting

Diodes offers the AL5814, AL5817, AL5815 and AL5816 linear LED controllers, claimed to deliver dimmable and adjustable drive current for LED strings with more than 80 per cent efficiency. The AL58xx series provides a low bill of materials cost for a range of applications in the commercial and industrial areas including signage, instrumentation illumination, lighting of appliance interiors, architectural details and general smart-lighting installations.

Input range is 4.5 to 60V. The AL5814, AL5817, AL5815 and AL5816 linear LED controllers do not require inductors and maintain good EMI performance, making system integration simpler. Internal power dissipation is also minimised compared with other designs due to an external power transistor, says Diodes. The AL58xx series is capable of providing up to 15mA to an external MOSFET or bipolar transistor to drive LED strings. The LED drive current is configured by an external resistor with four per cent reference voltage accuracy and excellent temperature stability. In addition, the AL5815 and AL5816 devices support PWM diming, while the AL5814 and AL5817 devices support both analogue and pulse width modulation (PWM) dimming.

Protection features include over-temperature and input under-voltage lock-out. The AL5814 and AL5817 devices also provide ‘LED open’ protection via a Vfault pin, as well as LED thermal fold-back protection.

The linear controllers exhibits good EMI performance and the wide temperature range of -40 to +105 degree C enables the parts to also operate in harsh environments.

The AL58xx series is available in SOT-25 and thermally-enhanced MSOP-8EP packages. 

Diodes manufactures and supplies application specific standard products within the broad discrete, logic, analogue and mixed-signal semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets.

The company’s portfolio includes diodes, rectifiers, transistors, MOSFETs, protection devices, function-specific arrays, single gate logic, amplifiers and comparators, Hall-effect and temperature sensors, power management devices, including LED drivers, AC/DC converters and controllers, DC/DC switching and linear voltage regulators, and voltage references along with special function devices, such as USB power switches, load switches, voltage supervisors, and motor controllers. Diodes also has timing, connectivity, switching, and signal integrity solutions for high-speed signals.

Corporate headquarters and Americas’ sales office are located in Plano, Texas and Milpitas, California, USA. Design, marketing, and engineering centres are located in Plano, Milpitas, Taipei, Taoyuan City, and Zhubei City, Taiwan; Manchester, England; and Neuhaus, Germany.

Diodes’ wafer fabrication facility is located in Manchester, with an additional facility located in Shanghai, China. Diodes has assembly and test facilities located in Shanghai, Jinan, Chengdu, and Yangzhou, China, as well as in Hong Kong, Neuhaus and Taipei.

http://www.diodes.com

> Read More

About Smart Cities

This news story is brought to you by smartcitieselectronics.com, the specialist site dedicated to delivering information about what’s new in the Smart City Electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Smart Cities Registration