Microcontroller secures updates for the connected car

Large on-chip memory and support for secure over the air (OTA) updating of electronic control unit (ECU) software lets vehicle manufacturers streamline maintenance using the latest addition, the SPC58NH92x microcontrollers, says STMicroelectronics.

The EVITA (e-safety vehicle intrusion protected applications) -compliant hardware security module keeps connected cars and occupants safe, says STMicro. Being EVITA Full compliant, it implements industry-leading attack prevention, detection, and containment techniques, adds the company.

As critical vehicle powertrain, body, chassis, and infotainment features increasingly become defined by software, securely delivering updates such as fixes and option packs OTA are cost-efficient and convenient. The SPC58 H has been added to the Chorus series of automotive microcontrollers. It has three high-performance processor cores, more than 1.2Mbyte RAM and powerful on-chip peripherals, and can run multiple applications concurrently to allow more flexible and cost-effective vehicle-electronics architectures.

Two independent Ethernet ports provide high-speed connectivity between multiple Chorus chips throughout the vehicle and enable responsive in-vehicle diagnostics, adds STMicro. There are also 16 CAN-FD and 24 LINFlex interfaces, enabling Chorus to act as a gateway for multiple ECUs and support smart gateway functionality via two Ethernet interfaces which are also on-chip.

To protect connected-car functionalities and allow OTA updates to be applied safely, the Chorus chip contains a hardware security module (HSM) which is capable of asymmetric cryptography.

The SPC58NH92x, has 10Mbyte on-chip flash and features a triple-core architecture clocking at 200Mhz equipped with more than 1.2Mbyte RAM, delivering up to 1763 CoreMark containing ST’s Power Architecture z4 core, which gives developers the flexibility to host multiple applications on one microcontroller, or to run multiple tasks concurrently. The device offers also ASIL-D safety capabilities.

The SPC58NH92x’s context-swap mechanism allows current application code to run continuously even while an update is downloaded and made ready to be applied later at a safe time. The older software can be retained, giving the option to roll-back to the previous version in an emergency. Hyperbus and eMMC/SDIO high-speed interfaces to off-chip memory are also integrated, enabling further storage expansion.

Configurable smart low-power modes enable the SPC58 microcontroller to perform critical functions even when in standby.

http://www.st.com

> Read More

600V GaN FET supports applications up to 10kW

Claimed to double power density in industrial and telecomms applications, the LMG341x family of high-voltage GaN FETs has been announced by Texas Instruments.

The 600V GaN FETs of 50 and 70-mOhm power stages support applications from sub 100W to 10kW. The FETs enable designers to create smaller, more efficient and higher-performing designs compared to silicon FETs in AC/DC power supplies, robotics, renewable energy, grid infrastructure, telecomms and personal electronics applications.

The LMG341x family devices provide an alternative to traditional cascade and standalone GaN FETs by integrating functional and protection features to simplify design, says TI. This enable greater system reliability and optimisation of the performance of high-voltage power supplies. With integrated current limiting of up to 100 nanoseconds and over-temperature detection, the devices protect against unintended shoot-through events and prevent thermal runaway. System interface signals enable a self-monitoring capability.

TI’s integrated GaN power stage doubles power density and reduces losses by 80 per cent compared to silicon MOSFETs, explains TI. Each device is capable of fast, 1MHz switching frequencies and slew rates of up to 100V/nanoseconds.

The family of GaN FETs is backed by 20 million hours of device reliability testing, including accelerated and in-application hard switch testing.

The LMG3410R050, LMG3410R070 and LMG3411R070are available now in 8.0 x 8.0mm split-pad, quad flat no-lead (QFN) packaging.

Visitors to the Texas Instruments stand C4-131 at electronica (13 – 16 November at Messe Munchen, Germany) will see a 10kW cloud-enabled grid link demonstration, jointly developed by TI and Siemens. The demonstration uses TI’s LMG3410R050 600V GaN FET with integrated driver and protection, enabling engineers to achieve 99 per cent efficiency and up to 30 per cent reduction in power component size compared to a traditional silicon design.

Texas Instruments is a semiconductor design and manufacturing company that develops analogue integrated circuits (ICs) and embedded processors.

http://www.TI.com

> Read More

Farnell element14 adds Symbisa IoT deployment and data monitoring

Combining hardware, mobile connectivity and easy access to data to make the IoT accessible, Hanhaa’s Symbisa is an Excel-integrated IoT device that is now available from Farnell element14.

The Symbisa module is an all-in-one, always-connected device, approximately the size of a smartphone, that carries sensors capable of detecting and collecting environmental information including GPS location, orientation, temperature, light and humidity. Typical applications include the monitoring of temperature and humidity of greenhouses or storage areas, or tracking equipment on hire, including whether it has been in an accident or dropped in transit.

Based on Microsoft Excel and with an Excel add-in, it enables users to bring real-world data streams directly into any desktop or mobile device that runs Excel for Office 365. Each Symbisa sensor is associated with a custom function in Excel, as are pre-configured events, meaning sensor data flows directly into Excel worksheet cells.  Users can also push data from Excel up to a unit’s e-ink display.  It can therefore be used by anyone with basic spreadsheet knowledge, says the company, to explore the possibilities of the IoT, interpreting sensor data, developing dashboards and triggering events that require follow-on actions in a matter of minutes – without coding, engineering capabilities, or a WiFi or network link-up.

Connectivity is through Hanhaa’s secure global mobile network which charges by how often data is captured rather than the amount of data used. Users can send messages or barcodes direct from Excel to be displayed on the e-ink display on the module, ready for a person or machine to read and action in the field.   

Key sensor parameters are location accuracy, with standard GNSS resolution down to three meters provided with the position dilution of precision (PDoP) parameter). Symbisa also detects shock up to ±16g, ambient light at 560nm and has a pressure sensing range of 260 to 1260 hPa and humidity sensing range of five to 90 per cent non-condensing. It operates at -15 to +50 degrees C.

The Symbisa board measures 130 x 100 x 10.5mm and weighs 160g and has quad band GSM radio for communications. Units also carry an e-ink display for text and/or barcode messaging, a battery sufficient for over two weeks’ standalone use, and a USB 2.0 connector for re-charging or hard-wired configuration.

Symbisa is exclusively available from Farnell element14 in Europe and Newark element14 in North America.

http://www.element14.com/symbisa

> Read More

RS Components offers UrsaLeo Pi for IoT-sensor development

Based on the Raspberry Pi compute engine, the UrsaLeo Pi development kit delivers all the functionality of the UrsaLeo UltraLite development kit at a lower price, says distributor RS Components.

The development kit combines Silicon Labs Thunderboard 2 sensor module with a Raspberry Pi development board, to deliver all the functionality of the UrsaLeo UltraLite development kit at a lower price. There is less debug support and restrictions on hardware re-use, but the kit offers price-conscious development for sectors such as industry 4.0, automotive diagnostics, healthcare, and general data monitoring, according to RS Components.

The Thunderboard 2 module contains temperature, humidity, UV, ambient light, barometric pressure, indoor air quality, and gas sensors, a six-axis inertial sensor, a digital microphone, and a Hall sensor. The integrated Silicon Labs EFR32 Mighty Gecko multi-protocol 2.4GHz radio supports Bluetooth Low Energy, Thread, ZigBee, or proprietary short-range protocols. Sample applications and application program interfaces (APIs) are provided to manage sensors, run diagnostics, and share information with enterprise software or business intelligence applications.

Like the UrsaLeo Lite, UrsaLeo Pi is ready to connect to the UrsaLeo platform, which allows users to view sensor data and launch IoT applications such as storage and analytics from within a customised dashboard. New sensors can be added simply, and additional users can be invited, for the sharing of data and co-development of projects while protecting the owner’s Google Cloud account information.

UrsaLeo also provides a customisable dashboard and user-definable events to trigger alerts (texts, emails and actions). Up to 50Mbyte of data per month can be sent to the cloud platform, free of charge, by a single user.

The UrsaLeo Pi is in stock now at RS in the EMEA and Asia Pacific regions.

RS Components is a global multi-channel distributor, offering more than 500,000 industrial and electronics products, sourced from over 2,500 leading suppliers, and provide a range of services to over one million customers. It has operations in 32 countries and ships more than 50,000 parcels a day.

http://www.rs-online.com

> Read More

About Smart Cities

This news story is brought to you by smartcitieselectronics.com, the specialist site dedicated to delivering information about what’s new in the Smart City Electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Smart Cities Registration