Myrtle.ai claims ML accelerator can result in significant data centre savings

Claimed to be the industry’s most efficient accelerator for recommendation models, SEAL could save hyperscale and tier one data centre companies hundreds of millions of dollars every year, says Mrytle.ai.

Deep learning-based recommendation models are one of the most common data centre workloads, typically used for search, news feeds, adverts and personalised content. Recommendation models contain a mix of dense and sparse features, which leads to complex memory access challenges for the majority of the time (up to 80 per cent), says the machine learning specialist. Throughput is constrained by memory bandwidth in a typical compute infrastructure, which means that expensive compute resources are highly under-utilised, says Mrytle.ai.

It has announced SEAL which accelerates the memory-bound inference operations in recommendation models. This delivers large gains in latency-bounded throughput within existing infrastructure, enabling data centre companies to scale rapidly and halve the infrastructure cost of their peak traffic capability.

Energy consumption, which is a significant challenge, can be reduced by more than half, adds Mrytle.

Peter Baldwin, CEO at Myrtle.ai, explains: “SEAL works seamlessly from within the deep learning framework PyTorch, fully preserves existing model accuracy and supports model co-location and sharding. It’s also complementary to existing compute accelerators and scalable, so adoption is as straightforward as possible.”

SEAL is available initially in the Open Compute Project M.2 accelerator module form factor, intended for use in Glacier Point carrier cards. In this format, it delivers up to 384Gbyte of DDR4 memory per carrier.

First customer evaluations are anticipated in Q3 2020.

SEAL represents the lowest power, smallest form factor, easiest-to-deploy method of adding memory bandwidth to existing infrastructure used for recommendation models, claims Mrytle.

The company has revealed that it is also reviewing alternative form factors.

Myrtle.ai optimises inference workloads such as recommendation models, recurrent neural networks and other deep neural networks with sparse features. The company’s recommendation models enable businesses to rapidly scale and improve their services while reducing capital costs and energy consumption.

Myrtle.ai is a founding member of MLCommons, the benchmarking organisation driving machine learning innovation.

http://www.myrtle.ai

> Read More

Embedded reader module is smallest yet, says HID Global

To allow developers to embed RFID into devices for use in constrained space, HID Global has added the Omnikey 5127CK Reader Core to its Omnikey family.

The reader core uses standard interfaces so that it can be embedding into limited spaces and battery-powered devices.  It enables handheld devices, tablets, PCs and notebooks to keyboards, displays, monitors, and kiosks to be used across a range of applications, says HID Global.

The company also offers a software development kit to support development and integration of the readers. The reader core accelerates time-to-market with streamlined configuration and flexible connectivity.  It includes modular approval certification for wireless devices, efficient power management (USB suspend/resume and remote wake up modes) and external off-board high frequency / low frequency and Bluetooth Low Energy (BLE) antennae. There is also the option to design custom antennae to meet specific embedded requirements.

The Omnikey 5127CK Reader Core supports multiple low and high frequency credential technologies within a single device and includes Apple’s Enhanced Contactless Polling (ECP) to support credentials in Apple Wallet.  It also supports mobile access via NFC or BLE, as well as iCLASS Seos, iCLASS SE, HID Prox, MIFARE Classic and MIFARE DESFire EV1/EV2 credential technologies.

HID Global makes it possible for people to transact safely, work productively and travel freely. Its trusted identity solutions give people convenient access to physical and digital places and connect things that can be identified, verified and tracked digitally.

Millions of people around the world use HID products and services to navigate their everyday lives, and over two billion things are connected through HID technology. The company works with governments, educational institutions, hospitals, financial institutions, industrial businesses and some of the most innovative companies on the planet.

The company is headquartered in Austin, Texas, USA and operates international offices that support customers in more than 100 countries.

http://www.hidglobal.com

> Read More

STM32 Discovery kit simplifies IoT-node connection and security

Complex software challenges for IoT nodes are simplified, says STMicroelectronics, at the introduction of its B-L4S5I-IOT01A STM32 Discovery kit. The kit comes with a qualified port of FreeRTOS, integrated into the STM32Cube ecosystem and ready to connect to Amazon Web Services (AWS).

The hardware comprises an STM32L4+ microcontroller board that contains an extensive selection of ST MEMS sensors, an STSAFE-A110 secure element, Bluetooth 4.2 and Wi-Fi modules, and an NFC tag with printed antenna for flexible, low-power communication with cloud servers. Combined with the X-Cube-AWS v2.0 STM32Cube Expansion pack, the kit can be used as a reference design to simplify and accelerate completion of the final product.

The X-Cube-AWS v2.0 pack ensures proper integration of the FreeRTOS standard AWS connectivity framework within the STM32Cube environment. This lets users take advantage of both FreeRTOS and STM32Cube without developing additional software. It also supports AWS native services including standard firmware over the air (FOTA) tasks and handles interactions with the on-board STSafe-A110 secure element, including taking care of AWS IoT Core Multi-Account Registration and assigning security-critical operations during boot-up, device authentication and OTA firmware verification.

The STM32L4+ board is featured to meet the performance demands and energy constraints typically placed on IoT nodes. The STM32L4S5VIT6 low-power Arm Cortex-M4 microcontroller combines 2Mbyte flash, 640Kbyte RAM, digital and analogue peripherals and hardware encryption accelerator. The on-board sensors comprise the HTS221 capacitive digital relative humidity and temperature sensor, LIS3MDL three-axis magnetometer, LSM6DSL 3D accelerometer and 3D gyroscope, LPS22HB absolute digital output barometer, VL53L0X time of flight and gesture-detection sensor and two digital omnidirectional microphones.

The B-L4S5I-IOT01A Discovery kit can be ordered directly from STMicroelectronics. The X-Cube-AWS v2.0 STM32Cube Expansion pack is ready to download free of charge.

http://www.st.com

> Read More

EnOcean adds IoT starter kit for Aruba Wi-Fi

An IoT starter kit developed by EnOcean simplified the integration of EnOcean wireless sensors with Aruba Wi-Fi access points. The two companies have partnered to facilitate the integration of IoT sensors into existing IT infrastructure and leveraging IT security mechanisms to protect IoT data and devices. The Eiska starter kit (Eisku in North America) includes an EnOcean EMSIx multisensor, an Easyfit wireless switch, an EnOcean USB stick, and demonstration software. All devices support the EnOcean radio standard (ISO/IEC 14543-3-10/11).

The starter kit is used with a separately purchased Aruba access point.

EnOcean USB sticks are available in both 868MHz (Europe) and 902MHz (USA/Canada) versions, and are compatible with any Aruba Wi-Fi 5 and Wi-Fi 6 access point with a USB port that is running ArubaOS 8.7 software. Aruba’s Zero-Trust Network automatically establishes a secure data connection between EnOcean-compatible devices and the IoT application. There is therefore no need for gateways, which reduces costs.

“Customers only need to attach the included sensor and switch where they want to collect data and stick the USB device into their Aruba access point,” explains Troy Davis, vice president of sales North America west region. The USB stick “opens up the world to 5,000 products [based on EnOcean’s energy harvesting technology] from members of the EnOcean Alliance,” he adds.

EnOcean’s energy harvesting sensors generate energy from light, movement or temperature, eliminating the need for batteries or power wiring. The EMSIx multi-sensor combines temperature, humidity, light level, acceleration and magnet contact sensors, making it suitable for a variety of IoT and smart building applications. An integrated near field communication (NFC) interface enables the multi-sensor to be configured and commissioned quickly and easily. The wireless Easyfit energy harvesting switch can be placed anywhere lighting control is needed, including difficult to wire, architecturally sensitive areas, such as glass, marble, reinforced concrete and room dividers.

The European Eiska starter kit includes an EnOcean USB 300, a solar-powered EMSIA multi-sensor and an Easyfit EWSDA double rocker switch. The Eisku starter kit includes an EnOcean USB 500U, the solar-powered EMSIU multi-sensor, an Easyfit EDRPU double rocker switch, an ETHSU temperature and humidity sensor, and an EMCSU magnet contact sensor.

Demonstration software includes dashboards to show control activity in real-time. The IoT starter kits are available now in Europe from Arrow Electronics, and in North America from Ingram Micro.

http://www.enocean.com

> Read More

About Smart Cities

This news story is brought to you by smartcitieselectronics.com, the specialist site dedicated to delivering information about what’s new in the Smart City Electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Smart Cities Registration